1,000+ Opportunities
Find the right grant
Search federal, foundation, and corporate grants with AI — or browse by agency, topic, and state.
Engineering of Biomedical Systems (EBMS) Program is sponsored by U.S. National Science Foundation (NSF). The EBMS program supports fundamental and transformative research at the interface of engineering and biomedical sciences to solve biomedical problems.
Projects should focus on high-impact, transformative methods and technologies, including the development of validated models (living or computational) of normal and pathological tissues and organ systems, and advanced biomanufacturing of three-dimensional tissues and organs.
Get alerted about grants like this
Save a search for “U.S. National Science Foundation (NSF)” or related topics and get emailed when new opportunities appear.
Search similar grants →Extracted from the official opportunity page/RFP to help you evaluate fit faster.
Engineering of Biomedical Systems | NSF - U.S. National Science Foundation Engineering of Biomedical Systems NSF's implementation of the revised 2 CFR NSF Financial Assistance awards (grants and cooperative agreements) made on or after October 1, 2024, will be subject to the applicable set of award conditions, dated October 1, 2024, available on the NSF website .
These terms and conditions are consistent with the revised guidance specified in the OMB Guidance for Federal Financial Assistance published in the Federal Register on April 22, 2024.
Important information for proposers All proposals must be submitted in accordance with the requirements specified in this funding opportunity and in the NSF Proposal & Award Policies & Procedures Guide (PAPPG) that is in effect for the relevant due date to which the proposal is being submitted. It is the responsibility of the proposer to ensure that the proposal meets these requirements.
Submitting a proposal prior to a specified deadline does not negate this requirement.
Updates to NSF Research Security Policies On July 10, 2025, NSF issued an Important Notice providing updates to the agency's research security policies, including a research security training requirement, Malign Foreign Talent Recruitment Program annual certification requirement, prohibition on Confucius institutes and an updated FFDR reporting and submission timeline.
Supports fundamental and transformative research that integrates engineering and life sciences to solve biomedical problems. Supports fundamental and transformative research that integrates engineering and life sciences to solve biomedical problems.
The Engineering of Biomedical Systems program is part of the Engineering Biology and Health cluster, which also includes: 1) the Biophotonics program; 2) the Biosensing program; 3) the Cellular and Biochemical Engineering program; and 4) the Disability and Rehabilitation Engineering program.
The goal of the Engineering of Biomedical Systems (EBMS) program is to provide opportunities for fundamental and transformative research projects that integrate engineering and life sciences to solve biomedical problems and serve humanity in the long term. Projects are expected to use an engineering framework (for example, design or modeling) that supports increased understanding of physiological or pathophysiological processes.
Projects must include objectives that advance both engineering and biomedical sciences. Projects may include: methods, models, and enabling tools applied to understand or control living systems; fundamental improvements in deriving information from cells, tissues, organs, and organ systems; or new approaches to the design of systems that include both living and non-living components for eventual medical use in the long term.
The EBMS program supports fundamental and transformative research in the following areas of biomedical engineering: Development of validated models (living or computational) of healthy and pathological tissues and organ systems that can support improved fundamental understanding of these systems or that could be applied in the future for development and testing of medical interventions; Design and validation of systems that integrate living and non-living components for improved understanding of physiology that could be applied in the future for diagnosis, monitoring, and treatment of disease or injury; Design and subsequent application of technologies and tools to investigate fundamental physiological and pathophysiological processes; Advanced biomanufacturing of three-dimensional tissues and organs; and Application of engineering tools and principles, including mathematical modeling, to quantitatively study the immune system in health and disease and to develop techniques for controlling and modulating a host’s immune response to challenges such as infectious diseases, cancer, implants, autoimmune disorders, wounds, etc. The long-term impact of the projects can be related to effective disease diagnosis and/or treatment, or improved health care delivery.
However, immediate goals should focus on improved fundamental understanding of cell and tissue function in normal or pathological conditions and advancing biomedical engineering. Innovative proposals outside of these specific areas of biomedical engineering may be considered.
However, prior to submission, it is strongly recommended that the PIs contact the program director to avoid the possibility of the proposal being returned without review . Related programs also fund biomedical engineering research, and PIs are encouraged to examine these to find the appropriate program for submission.
The EBMS program does not support proposals having as their central theme drug design and delivery, the development of biomedical devices that do not include a living biological component, or the development of animal models of disease. For consideration by the EBMS program, proposals that advance the design of tools or technologies should also apply those technologies to advance knowledge in biomedical science.
NSF does not support clinical trials; however, feasibility studies involving human volunteers may be supported if appropriate to the project objectives. Projects with a central focus on design or optimization of a device, material, algorithm, or process alone without exploring new fundamental biomedical science are not appropriate for the EBMS program.
Furthermore, although research on biomaterials, cellular biomechanics, manufacturing systems, or algorithm/device design may constitute a part of the proposed studies, such research can be more appropriately targeted to other NSF programs: Projects that aim to improve protein engineering or cellular biomanufacturing - either manufacturing cells or cell-derived products - should consider the Cellular and Biochemical Engineering (CBE) program.
Projects that focus on the development and application of microphysiological systems that model functional recovery related to a specific human disability or injury mechanism should consider the Disability and Rehabilitation Engineering (DARE) program. Biomaterials-focused projects should consider the Biomaterials (BMAT) program in the Division of Materials Research (DMR).
Cellular and tissue biomechanics projects should consider the Biomechanics and Mechanobiology (BMMB) program in the Division of Civil, Mechanical, and Manufacturing Innovation (CMMI). Manufacturing systems proposals should consider the Advanced Manufacturing (AM) program in the Division of Civil, Mechanical, and Manufacturing Innovation (CMMI).
Innovative research on signal processing techniques or dynamic biosensing systems should consider the Communications, Circuits, and Sensing-Systems (CCSS) program in the Division of Electrical, Communications and Cyber Systems (ECCS).
Innovative research on novel devices based on the principles of electronics, optics and photonics, optoelectronics, magnetics, opto- and electromechanics, electromagnetics, and related physical phenomena, also including material-device interaction, should consider the Electronics, Photonics and Magnetic Devices (EPMD) Program in the Division of Electrical, Communications and Cyber Systems (ECCS).
Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field. Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact of success in the research on society and/or industry.
The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of PI time per year (awards for multiple investigator projects are typically larger).
Proposal budgets that are much larger than typical should be discussed with the program director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the “What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)” link towards the bottom of this page. Faculty Early Career Development (CAREER) program proposals are strongly encouraged.
Award duration is five years. The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description .
Proposals for Conferences, Workshops, and Supplements : PIs are strongly encouraged to discuss their requests with the program director before submission of the proposal. Grants for Rapid Response Research (RAPID) and EArly-concept Grants for Exploratory Research (EAGER) are also considered when appropriate. Please note that proposals of these types must be discussed with the program director before submission.
Grant Opportunities for Academic Liaison with Industry (GOALI) proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year.
Details about RAPID, EAGER, and GOALI are available in the Proposal & Award Policies & Procedures Guide (PAPPG), Part 1, Chapter II, Section E: Types of Proposals. Compliance : Proposals that are not compliant with the Proposal & Award Policies & Procedures Guide (PAPPG) will be returned without review.
May 7, 2025 - 2025 ENG/CBET CAREER Program Webinar September 10, 2024 - Engineering of Biomedical Systems Office Hours August 9, 2024 - Engineering of Biomedical Systems Office Hours July 9, 2024 - Engineering of Biomedical Systems Office Hours June 3, 2024 - Engineering of Biomedical Systems Office Hours Awards made through this program Browse projects funded by this program Map of recent awards made through this program Directorate for Engineering (ENG) Division of Chemical, Bioengineering, Environmental and Transport Systems (ENG/CBET)
Based on current listing details, eligibility includes: Universities and other research institutions are eligible. Applicants should confirm final requirements in the official notice before submission.
Current published award information indicates Not specified Always verify allowable costs, matching requirements, and funding caps directly in the sponsor documentation.
The current target date is June 6, 2025. Build your timeline backwards from this date to cover registrations, approvals, attachments, and final submission checks.
Federal grant success rates typically range from 10-30%, varying by agency and program. Build a strong proposal with clear objectives, measurable outcomes, and a well-justified budget to improve your chances.
Requirements vary by sponsor, but typically include a project narrative, budget justification, organizational capability statement, and key personnel CVs. Check the official notice for the complete list of required attachments.
Yes — AI tools like Granted can help research funders, draft proposal sections, and check compliance. However, always review and customize AI-generated content to reflect your organization's unique strengths and the specific requirements of the solicitation.
Review timelines vary by funder. Federal agencies typically take 3-6 months from submission to award notification. Foundation grants may be faster, often 1-3 months. Check the program's timeline in the official solicitation for specific dates.
Many federal programs offer multi-year funding or allow competitive renewals. Check the official solicitation for continuation and renewal policies. Non-competing continuation applications are common for multi-year awards.
Past winners and funding trends for this program
Expanding K-12 Resources For AI Education is sponsored by U.S. National Science Foundation (NSF). This Dear Colleague Letter (DCL) invites supplemental funding proposals from existing NSF awardees with K-12 AI or computer science education experience. The aim is to refine, scale, evaluate, and/or implement established K-12 activities related to AI education. Proposed efforts should align with themes such as teacher professional development, curricula and instructional materials, and technology and tools for AI education.
National Artificial Intelligence Research Resource (NAIRR) Pilot is sponsored by U.S. National Science Foundation (NSF). The NAIRR Pilot is a public-private initiative connecting U.S. researchers and educators to advanced computational and data platforms, datasets, software, AI models, and technological expertise to accelerate AI-driven discovery and innovation. While broad in scope, research into trustworthy AI, human-AI interaction, and the societal implications of AI (including in sectors like hospitality and tourism) would be relevant.
Improving Undergraduate STEM Education (IUSE): EDU is sponsored by U.S. National Science Foundation (NSF). A core NSF STEM education program that seeks to promote novel, creative, and transformative approaches to generating and using new knowledge about STEM teaching and learning to improve STEM education for undergraduate students. It supports projects that bring advances in STEM knowledge into undergraduate education, adapt evidence-based practices, and lay the groundwork for institutional improvement.