1,000+ Opportunities
Find the right grant
Search federal, foundation, and corporate grants with AI — or browse by agency, topic, and state.
This listing may be outdated. Verify details at the official source before applying.
Find similar grantsAdditive Manufacturing of Reinforced Concrete Structures with Integrated Energy Efficiency is sponsored by Department of Energy (DOE). Investigates the behavior of reinforced 3D-printed concrete walls with integrated thermal insulation to improve energy efficiency in building construction.
Get a weekly digest of new grants like this
A free weekly digest of new foundation and federal funding opportunities as they're added to Granted. Unsubscribe anytime.
Or search similar grants →Extracted from the official opportunity page/RFP to help you evaluate fit faster.
CX-101866: Additive Manufacturing of Reinforced Concrete Structures with Integrated Energy Efficiency | Department of Energy CX-101866: Additive Manufacturing of Reinforced Concrete Structures with Integrated Energy Efficiency Award Number: DE-EE0009070, CX(s) Applied: A9, B3.
6, Building Technologies Office, Location(s): IN, Office(s): Golden Field Office Office of NEPA Policy and Compliance Award Number: DE-EE0009070 Building Technologies Office Office(s): Golden Field Office The U.S. Department of Energy (DOE) is proposing to provide funding to University of Notre Dame to investigate the behavior of reinforced 3-D printed concrete walls with integrated thermal insulation.
A suite of samples with different construction and insulation methods would be printed and tested for thermal and structural behavior. Recommendations would be made for insulating methods and structural designs of thermally efficient 3D-printed walls.
CX-101866: Additive Manufacturing of Reinforced Concrete Structures with Integrated Energy Efficiency CX-101866: Additive Manufacturing of Reinforced Concrete Structures with Integrated Energy Efficiency
According to the current listing, eligibility includes: Academic institutions and research organizations. Confirm the full requirements in the official notice before applying.
The current listing shows $500,000. Verify award ceilings, matching requirements, and allowable costs in the official notice.
Additive Manufacturing of Reinforced Concrete Structures with Integrated Energy Efficiency is funded by Department of Energy (DOE). Verify program details on the funder's official page before applying.
Start from the official opportunity page linked in this listing — it carries the sponsor's submission instructions.
Call with Digital Partnership and TTC countries is sponsored by European Commission — Horizon Europe. Expected Outcome: The focus needs to be on areas where Digital Partnership countries bring strong complementary expertise, including advanced packaging, heterogeneous integration, and photonic chip technologies. The topic would aim to foster collaboration between European and Digital Partnership countries’ R&I communities. Projects are expected to contribute to the following outcomes: • Innovative design and integration concepts for neuromorphic computing systems supporting very low energy consumption, connectivity, embedded functions for mobile applications. • Alternative manufacturing process technologies for semiconductor chips including frontend or backend for heterogenous integration. The technologies should sustain in the mid- and long-term the fast-paced evolution of device performance, miniaturisation and cost, while reducing the environmental footprint. • Very advanced packaging solutions aiming heterogeneous integration of multiple functions and materials for applications in communication (RF, mmW or THz), sensing, actuating, power management and active/passive integration. Programme areas: Horizon Europe (HORIZON), Global Challenges and European Industrial Competitiveness, Digital, Industry and Space
Develop breakthrough and sustainable bio-based textile fibres is sponsored by European Commission — Horizon Europe. Expected Outcome: Successful proposals will contribute to the updated EU Bioeconomy Strategy, the Chemicals Strategy for Sustainability, the EU Strategy for Sustainable and Circular Textiles, the Clean Industrial Deal, and the Ecodesign Sustainable Products Regulation. Indirect contribution is expected towards the objectives of the Horizon Europe Mission "Restore our Ocean and Waters by 2030" in particular to Obj 2: "Prevent and eliminate pollution of our oceans, seas and waters”. Projects results are expected to contribute to the following expected outcomes: Wider availability of natural and/or man-made bio-based fibres meeting market requirements. Scalable production processes for novel man-made and/or modified natural fibres. Enhanced circularity and prevent microplastics release compared to benchmarks. Scope: Fossil-based synthetic textile fibre production has grown significantly, reaching 67% of the global market in 2023. [1] Among bio-based fibres, cotton plays a prominent role as it is the second most produced fibre at global level; however, it bears serious environmental concerns due to its massive land use and water consumption; moreover, the EU holds a minor share of the global cotton production (around 2%) and it is expected to remain a net importer in the future. Novel sustainable sources of natural fibres require significant improvements in some steps of textile production such as retting/degumming, spinning, modification and treatment. Man-made (synthetic and semi-synthetic) bio-based fibres are also slightly increasing their current market share, however there is a need to improve their technical performances to meet the requirements of final textile applications. Proposals under this topic should: Develop breakthrough processes to yield bio-based textile fibres from sustainably sourced biomass feedstock. Bio-based textile waste is eligible as feedstock. Bio-based man-made (synthetic and semi-synthetic) fibres and/or the extraction, refinement and functionalisation of natural fibres are in scope. Ensure compatibility with existing textile manufacturing processes and equipment to facilitate market penetration. Design the bio-based fibre(s) to improve specific technical requirements against state-of-the-art benchmarks, e.g., tenacity, flexibility, spinning quality, elasticity/plasticity, thermal resistance, flammability and durability. Test these properties according to existing standards/methods to assess the compatibility with end-products requirements. Design the bio-based textile fibres for sustainable end of life. Assess the actual feasibility of the targeted end of life option(s). Prevent release of microplastics and other harmful substances along the whole product life cycle. In addition to the specific requirements applicable for the type of action, as described in section 2.2.3.1 of the CBE JU Annual Work Programme 2026 [2] , proposals under this topic should: As part of the multi-actor approach (MAA), ensure adequate involvement of all key actors in the value chains relevant for this topic, including textiles manufacturers, feedstock suppliers, end users and/or consumers. Include a task to apply the SSbD framework, developed by the European Commission for the assessment of targeted textile fibres. For more information on the SSbD framework and criteria, refer to Safe and sustainable by design Ensure complementarities with past and ongoing R&I projects addressing similar challenges, including projects funded under Horizon 2020/Horizon Europe (under Cluster 6 and Cluster 4 of Horizon Europe, including the partnership ‘Textiles of the Future’) and BBI JU/CBE JU projects. [1] HARMSEN, P., SKRIFVARS, M. and MAGNOLFI, V., Bio-based textiles in a sustainable and circular bioeconomy, BORZACCHIELLO, M.T. (editor), European Commission, Ispra, 2025, JRC140676. [2] https://www.cbe.europa.eu/reference-documents Programme areas: Global Challenges and European Industrial Competitiveness, Food, Bioeconomy Natural Resources, Agriculture and Environment, Bio-based Innovation Systems in the EU Bioeconomy, Horizon Europe (HORIZON) Keywords: Materials engineering, Polymers and plastics, Textiles, Textiles including synthetic dyes, colours, fibres, bio-based textile fibres, man-made fibres, microplastics, natural fibres, safe and sustainable by design, textile manufacturing
Films and coatings for circular packaging is sponsored by European Commission — Horizon Europe. Expected Outcome: Successful proposals will contribute to the Circular Economy Action Plan, the Chemicals Strategy for Sustainability and the Ecodesign for Sustainable Products Regulation. Projects results are expected to contribute to the following expected outcomes: Wider availability of bio-based films and coatings for packaging products. Improved technical performances of packaging products compared to fossil based and/or bio-based benchmarks. Improved circularity of packaging products against specified market benchmarks taking into account production, use and EoL. Scope: Many research projects have focused on developing and piloting bio-based coatings and films for application in food and non-food packaging. When targeting packaging, a primary challenge is achieving adequate barrier properties (against oxygen, moisture, grease and volatiles), as bio-based materials are typically more hydrophilic than conventional plastics like PE or PET. Processing methods, including bio-based coating deposition, face scalability and reproducibility issues. Coatings must adhere well to substrates while maintaining technical properties and not hindering sustainable EoL. Printability is another concern, as bio-based surfaces can cause ink issues like smudging or poor adhesion. Durability under stress and operating conditions is still a challenge for certain bio-based applications. Finally, design for sustainability and sustainable EoL are critical to reduce over-packaging, avoid littering and increase circularity, according to the principles set out in the Ecodesign for Sustainable Products Regulation . Proposals under this topic should: Demonstrate (at least TRL 6) innovative technologies for obtaining bio-based films and/or coatings suitable for improving performance of packaging products. Both food and non-food packaging are in scope. At least one non-food packaging application should be addressed. While coatings and films must be bio-based, any (bio-based and/or non-bio based) material is in scope as a substrate. Demonstrate (at least TRL 6) the applicability of the developed solution(s) in the manufacturing of packaging product prototypes, ensuring compatibility with industrial packaging manufacturing processes. Assess targeted products properties according to the intended application(s) under conditions occurring during the use phases, including transport and storage. Such properties may include mechanical, barrier, surface properties, resistance to low or high temperatures, weathering, moisture and/or corrosion; compatibility with food contact requirements (when addressing food packaging), printability. Apply the eco-design principles, in line with the Ecodesign for Sustainable Products Regulation , to reduce overpackaging and enable/facilitate sustainable at EoL. Test the selected EoL alternatives (at TRL 5 and above). Circular EoL includes mechanical, chemical and/or enzymatic recycling, and composting and their possible combinations. Re-use and remanufacturing are also in scope when compatible with the application and common practices. Landfilling or incineration are out of scope. In addition to the specific requirements applicable for the type of action, as described in section 2.2.3.1 of the CBE JU Annual Work Programme 2026 [1] , proposals under this topic should: As part of the multi-actor approach (MAA), involve end users and engage consumers (when applicable) starting from the early stages to assess market acceptance of the targeted end-products and incorporate insights into product development. Assess the compatibility with the regulatory framework, in particular the Single Use Plastics Directive (SUP) and the Packaging and Packaging Waste Regulation (PPWR), identify opportunities for bio-based products and/or potential bottlenecks and provide recommendations for addressing them. Include a task to apply the SSbD framework, developed by the European Commission for the assessment of targeted bio-based films and coatings. For Programme areas: Global Challenges and European Industrial Competitiveness, Food, Bioeconomy Natural Resources, Agriculture and Environment, Bio-based Innovation Systems in the EU Bioeconomy, Horizon Europe (HORIZON) Keywords: Applied and industrial chemistry, Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics filled composites), Materials engineering (biomaterials, metals, ceramics, polymers, composites, etc.), Polymers and plastics, bio-based coatings, bio-based films, circular packaging, eco-design, end of life, food packaging, non-food packaging, recycling, safe and sustainable by design, STEP-Biotech
On September 21, 2026 DOE selected 21 projects under DE-FOA-0003472 — five EGS field tests and 16 exploration wells — for up to $99 million of a $171.5 million authorization. The solicitation is structured to reopen for up to 72 months on roughly annual cycles. Here is how to position for the next one.
Read articleDOE named 31 grid projects across 26 states for $1.9B on September 24, 2026. Recipients bring $3.35B of their own money. Here is what the selection list reveals about how to win the next GRIP round.
Read articleThe DOE Quantum Genesis Q Competition (DE-FOA-0003657) posted September 17, 2026 with an October 19 deadline. Phase I pays $250,000 then $1.25M on milestones; Phase II is a $100M pool plus two $50M bonus pools at 150 and 200 logical qubits. It is an Other Transaction Agreement, not a grant.
Read article