Recycling Research & Development (RR&D)

Arizona Sewer Overflow and Stormwater Reuse Municipal Grant (OSG) Program is sponsored by Arizona Department of Environmental Quality (ADEQ). This program, funded by the U. S. Environmental Protection Agency (EPA), provides funding for sewer overflow and stormwater reuse pilot projects. The goal is to reduce the discharge of pollutants into Arizona's lakes, rivers, and streams.

Films and coatings for circular packaging is sponsored by European Commission — Horizon Europe. Expected Outcome: Successful proposals will contribute to the Circular Economy Action Plan, the Chemicals Strategy for Sustainability and the Ecodesign for Sustainable Products Regulation. Projects results are expected to contribute to the following expected outcomes: Wider availability of bio-based films and coatings for packaging products. Improved technical performances of packaging products compared to fossil based and/or bio-based benchmarks. Improved circularity of packaging products against specified market benchmarks taking into account production, use and EoL. Scope: Many research projects have focused on developing and piloting bio-based coatings and films for application in food and non-food packaging. When targeting packaging, a primary challenge is achieving adequate barrier properties (against oxygen, moisture, grease and volatiles), as bio-based materials are typically more hydrophilic than conventional plastics like PE or PET. Processing methods, including bio-based coating deposition, face scalability and reproducibility issues. Coatings must adhere well to substrates while maintaining technical properties and not hindering sustainable EoL. Printability is another concern, as bio-based surfaces can cause ink issues like smudging or poor adhesion. Durability under stress and operating conditions is still a challenge for certain bio-based applications. Finally, design for sustainability and sustainable EoL are critical to reduce over-packaging, avoid littering and increase circularity, according to the principles set out in the Ecodesign for Sustainable Products Regulation . Proposals under this topic should: Demonstrate (at least TRL 6) innovative technologies for obtaining bio-based films and/or coatings suitable for improving performance of packaging products. Both food and non-food packaging are in scope. At least one non-food packaging application should be addressed. While coatings and films must be bio-based, any (bio-based and/or non-bio based) material is in scope as a substrate. Demonstrate (at least TRL 6) the applicability of the developed solution(s) in the manufacturing of packaging product prototypes, ensuring compatibility with industrial packaging manufacturing processes. Assess targeted products properties according to the intended application(s) under conditions occurring during the use phases, including transport and storage. Such properties may include mechanical, barrier, surface properties, resistance to low or high temperatures, weathering, moisture and/or corrosion; compatibility with food contact requirements (when addressing food packaging), printability. Apply the eco-design principles, in line with the Ecodesign for Sustainable Products Regulation , to reduce overpackaging and enable/facilitate sustainable at EoL. Test the selected EoL alternatives (at TRL 5 and above). Circular EoL includes mechanical, chemical and/or enzymatic recycling, and composting and their possible combinations. Re-use and remanufacturing are also in scope when compatible with the application and common practices. Landfilling or incineration are out of scope. In addition to the specific requirements applicable for the type of action, as described in section 2.2.3.1 of the CBE JU Annual Work Programme 2026 [1] , proposals under this topic should: As part of the multi-actor approach (MAA), involve end users and engage consumers (when applicable) starting from the early stages to assess market acceptance of the targeted end-products and incorporate insights into product development. Assess the compatibility with the regulatory framework, in particular the Single Use Plastics Directive (SUP) and the Packaging and Packaging Waste Regulation (PPWR), identify opportunities for bio-based products and/or potential bottlenecks and provide recommendations for addressing them. Include a task to apply the SSbD framework, developed by the European Commission for the assessment of targeted bio-based films and coatings. For Programme areas: Global Challenges and European Industrial Competitiveness, Food, Bioeconomy Natural Resources, Agriculture and Environment, Bio-based Innovation Systems in the EU Bioeconomy, Horizon Europe (HORIZON) Keywords: Applied and industrial chemistry, Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics filled composites), Materials engineering (biomaterials, metals, ceramics, polymers, composites, etc.), Polymers and plastics, bio-based coatings, bio-based films, circular packaging, eco-design, end of life, food packaging, non-food packaging, recycling, safe and sustainable by design, STEP-Biotech

SSbD bio-based polymers from alternative sources is sponsored by European Commission — Horizon Europe. Expected Outcome: Successful proposals will contribute to the Circular Economy Action Plan, the Chemicals Strategy for Sustainability, the Ecodesign for Sustainable Products Regulation, the Chemical Industry Action Plan, and the Clean Industrial Deal. Projects results are expected to contribute to the following expected outcomes: Sustainable feedstock diversification for the production of bio-based polymers. Scalable process(es) for obtaining SSbD bio-based polymers from bio-based feedstock alternative to primary biomass. Enlarge the portfolio of performant bio-based polymers, opening up new market applications. Scope: Emerging alternative sources of bio-based polymers are gaining more and more attention as substitutes for primary biomass from agriculture and forestry. Additional R&I effort is needed to study innovative and scalable processes where bio-based polymers from unexplored/alternative resources are the main products. Proposals under this topic should: Develop (at TRL 5) efficient processes for synthesis and/or extraction of bio-based polymer(s) from the alternative sources in scope, targeting high yield and selectivity. Primary biomass from agriculture and forestry is out of scope; for other applicable feedstock the CBE JU Strategic Research and Innovation Agenda (SRIA) [1] and its Annex V can be consulted. When relevant, develop adequate pretreatment/fractionation of targeted feedstock. Both new bio-based polymers and already established ones (but currently produced at scale from primary feedstock) are in scope. Integrate further isolation and purification (when relevant) of obtained bio-based polymer(s) according to specific application requirements. Functionalisation of purified bio-based polymers to achieve targeted properties is also in scope. Test (at least at TRL 4) the suitability of obtained bio-based polymers in circular-by-design final applications targeting at least two market sectors. Validate the technical performances of developed bio-based polymers materials/products and proving to fulfil market requirements for selected application sector(s). Test (at least at TRL 4) for suitable, safe and sustainable EoL options (recycling, biodegradation, re-use and/or re-manufacturing). When targeting biodegradable bio-based polymers, test biodegradability according to existing standards and methods. In addition to the specific requirements applicable for the type of action, as described in section 2.2.3.1 of the CBE JU Annual Work Programme 2026 [1] , proposals under this topic should: As part of the multi-actor approach (MAA), involve bio-based feedstock providers and waste management operators, end-users in targeted application sector(s) and consumers (if targeting consumer products). Include a task to apply the SSbD framework, developed by the European Commission for the assessment of targeted bio-based polymers. For more information on the SSbD framework and criteria, refer to Safe and sustainable by design . Ensure complementarities with past and ongoing R&I projects addressing similar challenges, including projects funded under Horizon 2020/Horizon Europe (under Cluster 6 and other Clusters of Horizon Europe) and BBI JU/CBE JU projects. [1] https://www.cbe.europa.eu/reference-documents [2] https://www.cbe.europa.eu/reference-documents Programme areas: Global Challenges and European Industrial Competitiveness, Food, Bioeconomy Natural Resources, Agriculture and Environment, Bio-based Innovation Systems in the EU Bioeconomy, Horizon Europe (HORIZON) Keywords: Applied and industrial chemistry, Materials engineering, Polymer chemistry, Polymers and plastics, alternative feedstock sources, bio-based polymers, bio-based products, biodegradation, biorefinery, circular-by-design, polymer extraction, polymer synthesis, recycling, safe and sustainable by design